Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Houston, TX | Elmstead Remodeling Houston
Elmstead Remodeling Houston provides independent ES Windows construction service across Houston, from Meyerland to the Energy Corridor. We install, repair, and replace ES Windows E-50, E-70, Tilt & Turn, and Fixed/Picture series units without any factory affiliation. What makes our ES Windows work different here is simple: we know how these frames behave on Houston’s shifting clay soils and under hurricane wind loads, because we’ve been correcting what those conditions do to them for years. Call (254) 272-5240 to schedule a free estimate.
We’ve built our ES Windows service around one truth about Houston construction: a window that works fine in Dallas will rack, fog, or leak here within a few seasons. The clay expands and contracts underneath slab-on-grade homes. The humidity saturates every seal. The storms test every flashing detail. We account for all of it before we touch the first fastener. That’s the standard Graham Stein, our owner, set when he brought his Southern California trade training to Houston, and it is the standard every Elmstead crew member works to on every ES Windows job.
Why Houston Residents Choose Us for ES Windows Service
We’re not an ES Windows dealer. We’re our General Contractor in Houston that has worked on ES Windows installations and repairs across decades of Houston remodels and new builds, and we know how these window systems behave in the Gulf Coast climate without any factory ties. That independence matters when you need an honest repair-versus-replace answer, not a sales pitch for a full window package.
Graham Stein learned the trade at Los Angeles Trade-Technical College and spent the better part of two decades swinging a hammer and managing crews across Southern California before running Bathroom Remodeling in Houston and other remodeling work in the area. On ES Windows jobs, that means one thing: before we quote a repair or replacement, we check the frame for square, the seals for saturation, and the rough opening for signs of slab movement. We use genuine OEM parts whenever available because ES Windows multi-point locking and tilt-and-turn hardware tolerances are tight. When discontinued seals or glazing gaskets are the problem, we supply high-grade marine-rated aftermarket components that outperform the originals in Houston humidity. Written price before any work starts. Drop cloths down before cutting starts. That’s the standard, every time.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Houston
- Fogging between panes from thermal seal failure. Houston’s humidity and temperature swings push moisture into failed IGUs, especially on west-facing walls that bake in the afternoon sun. We replace the sealed unit with an OEM IGU when available and re-glaze with marine-rated sealant.
- Tilt-and-turn hardware wear from salt-laden air. Homes from Clear Lake up through the East End deal with coastal air that corrodes hinges and locking points faster than inland homes ever will. We rebuild the multi-point locking mechanism with genuine ES Windows hardware and lubricate with corrosion-resistant compound.
- Water intrusion from deteriorated flashing and perimeter sealant. Houston’s torrential rain events expose every weak flashing detail. We remove old sealant, inspect the sill pan and drainage plane, and re-seal with products rated for 135 mph wind-driven rain.
- Frame racking and misalignment on slab foundations. Houston’s expansive clay soils move seasonally, and in 1970s-80s slab-on-grade tract homes, that movement pinches frames against brick veneer. We re-square the rough opening, reinforce with steel header where needed, and reset the unit so the multi-point locks engage cleanly.
- Drainage failures on elevated homes. In flood-elevated houses, original sill flashing no longer sheds water the same way. We re-engineer the flashing and drainage plane at the new height so water moves away from the frame, not into it.
ES Windows Service in Houston: What Local Conditions Mean for Your Equipment
In Meyerland and Braeswood, where Brays Bayou has repeatedly overflowed, many houses have been lifted 4 to 8 feet to meet FEMA flood elevation requirements. An ES Windows installation on a lifted structure is a different job than the same window on an original slab. The original sill heights were set for a specific drainage pattern, and once the house rises, that pattern breaks. Water that used to shed away from the frame now pools or runs backward into the rough opening. We see this on homes along Dumfries Drive and throughout the Meyerland grid, where elevation projects have become part of the neighborhood’s identity.
Our crew pulled a fogged ES Windows E-70 fixed unit from a 1980s ranch on Dumfries Drive in Meyerland after the slab shifted and pinched the frame against the brick veneer. We re-squared the rough opening with a steel header reinforcement, replaced the failed double-pane IGU with an OEM unit, and installed a new marine-grade perimeter sealant rated for 135 mph wind-driven rain. The homeowner hasn’t seen a drop of condensation since, even through two hurricane seasons. That’s the kind of repair you only get right if you understand both the window and the soil underneath it.
ES Windows Models & Products We Service in Houston
We work on the full ES Windows residential lineup: the E-50 Series, E-70 Series, Tilt & Turn Series, and Fixed/Picture Series. Each series has its own hardware profile and failure pattern in this climate, and we stock the most commonly needed OEM parts locally for faster Houston turnaround. For E-50 and E-70 units, that means replacement multi-point lock sets, hinge assemblies, and wedge gaskets. For Tilt & Turn units, we keep the tilt-latch and turn-lock components on hand. For discontinued seals and glazing gaskets, we use marine-rated aftermarket components that hold up better in Houston humidity than the original parts did. For more on the brand, see our ES Windows sales & service overview page.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Houston
Most ES Windows service work in Houston falls into one of these ranges. Your exact quote depends on the series, the number of units, the condition of the rough opening, and whether we’re repairing or replacing.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair (related water intrusion) | $400 – $1,800 |
Every estimate is written, line-itemed, and given to you before any work starts. No numbers that grow after the crew arrives. If a repair isn’t worth the cost, we’ll tell you and show you the math. Call (254) 272-5240 to schedule a free estimate and get your exact number.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Houston
In most cases, no. Impact-rated glazing requires a frame and anchoring system engineered for the load, and retrofitting a standard E-50 or E-70 frame typically compromises the seal and the structural rating. If impact windows are the goal, replacement is the honest answer. We can quote both paths so you see the cost difference clearly. Call (254) 272-5240 for exact pricing on your specific units.
Fogging between panes means the thermal seal on the insulated glass unit has failed, and Houston’s humidity is entering the air space between the glass. If the frame is square and the glass is intact, replacing the IGU is usually the right call and costs far less than a full replacement. If the frame is racked or the sealant has failed around the perimeter, replacement is often cheaper long-term. Call (254) 272-5240 and we’ll inspect your units and give you both numbers.
After foundation repair on a Houston slab home, the frame often sits slightly differently than it did before, and the multi-point locking hardware falls out of alignment. The fix is usually a hardware adjustment, not a replacement. We re-align the lock points, re-square the sash, and replace any worn components with genuine ES Windows parts.
Houston windstorm code requirements depend on your exact location and whether you’re in a designated windborne debris region. Standard ES Windows units are not impact-rated. If you need code-compliant impact protection, we install impact-rated windows and can confirm which products meet the requirements for your specific address. Call (254) 272-5240 to discuss your location and requirements.
We start by inspecting the existing flashing and drainage plane at the new elevation. Lifted homes change the way water moves across the sill, and the original flashing rarely works correctly after the lift. We re-engineer the flashing, replace degraded sealant, and reset any frames that shifted during the elevation process. This is common work in Meyerland and Braeswood. Call (254) 272-5240 for an inspection.
Service Areas Near Houston
We provide Houston service area coverage throughout the metro, including ES Windows service in Spring, ES Windows service in Pearland, Humble, League City, and Missouri City. If you’re within an hour of downtown Houston, we can schedule your ES Windows service.
Book Your ES Windows Service in Houston Today
If your ES Windows are fogging, leaking, or hard to lock, we’ll inspect them and give you a written price before any work begins. Call (254) 272-5240 to schedule your free estimate. A written price and a covered floor before any work begins – that is where the trust starts.
Written by Graham Stein, Owner at Elmstead Remodeling Houston, serving Houston since 2005.
