Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Spring, TX | Elmstead Remodeling Houston
We are a General Contractor in Spring providing independent Unilock construction and repair service across Spring, TX, from Cypresswood to Northampton and the newer master-planned communities east of I-45. We are not a manufacturer-authorized dealer, which means we answer to you, not a brand rep. The one thing that separates our Unilock work in Spring is this: we rebuild the base and drainage before we reset a single paver, because Spring’s shifting clay will undo a surface-only repair within one wet-dry cycle. Call (254) 272-5240 for a free estimate on paver patios, driveways, and U-Cara walls.
Why Spring Residents Choose Us for Unilock Service
Unilock sales & service is only as good as the crew’s understanding of what sits under the pavers. Spring’s housing stock runs from 1970s brick-veneer ranches with original landscaping to 2000s subdivisions where the builder laid pavers over whatever fill was cheapest that week. Graham Stein, owner of Elmstead Remodeling Houston, has spent years managing crews across the Houston area, and he’s particular about one thing on every Unilock job: mapping the downspouts and checking the grade before touching a single unit. A written price and a covered floor before any work begins – that is where the trust starts. On Unilock work, that means a written scope covering base repair, drainage correction, and unit count before the first paver comes out.
We use genuine Unilock replacement units when the original dimensions and color blend must match. For discontinued color runs or minor edge loss, we source comparably graded aftermarket units and blend them after an on-site color match. Either way, you see the plan and the price in writing before work starts.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Spring
- Edge spalling on Brussels Block: When sand joints wash out, water gets under the paver edges. Spring’s winter rains saturate, then a rare freeze pops the edges. We reset the affected units and re-sand the joints with polymeric sand that holds up to our rainfall.
- Settled Richcliff over poorly compacted clay sub-base: Summer drought shrinks Spring’s gumbo clay, the sub-base settles, and you get trip hazards at the joints. We pull the failed section, correct the base, and reset rather than patching the symptom.
- Faded or hazed Tudor pavers from sprinkler overspray: Mineral buildup from irrigation water leaves a white haze on Tudor Collection surfaces. We assess whether a cleaning protocol restores the finish or units need replacement.
- U-Cara wall panels cracking at the backer interface: Spring’s coarse, expansive clay backfill puts uneven pressure on modular wall panels. Cracks at the fiberglass backer usually mean the backfill wasn’t graded properly, and fixing the wall means fixing what’s behind it.
- Pooling water at garage approaches: A Unilock driveway that dips near the garage door after a drought cycle usually means the original base was sand over clay, not compacted limestone. We correct the base, not just the surface.
Unilock Service in Spring: What Local Conditions Mean for Your Equipment
Spring’s shifting Beaumont and Lake Charles clay means that any paver repair that ignores the slab’s original sub-base and drainage will fail again within one wet-dry cycle. We see this constantly in older Spring neighborhoods where the original patio or walkway was laid decades ago over whatever the builder had on site. Before we reset a single Unilock unit, we map where the downspouts discharge, check the slope away from the foundation, and test the base depth in three or four spots. In a Cypresswood home where a Richcliff driveway had sunk two inches near the garage after the summer drought, our crew removed the pavers and found the original base was only two inches of uncompacted sand over gumbo clay. We pulled the failed section, installed a geotextile and eight inches of crushed limestone, then reset the Richcliff with new polymeric sand. Six months later the joints were still tight and the garage approach no longer pooled water. That’s the difference between resetting a surface and rebuilding it.
Unilock Models & Products We Service in Spring
We work on Unilock pavers and walls all over Spring, from older estate-style installations with weathered Tudor or Brussels Block to newer subdivisions using Richcliff. That means our crews know which surfaces are worth resetting versus excavating down to the base. For Brussels Block and Tudor Collection repairs, we keep common replacement units stocked locally so we’re not waiting on a distributor in Houston. For Richcliff and U-Cara Modular Wall projects, we order ahead based on the job scope. When original dimensions and color blend must match for a seamless repair, we use genuine Unilock units. For minor loss or discontinued color runs, we source comparably graded aftermarket units and blend them after an on-site color match. We only recommend full replacement when the base has failed and resetting isn’t cost-effective.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Spring
What drives the cost of a Spring Bathroom Remodeling or paver project is what’s under the surface. A patio that just needs re-sanding costs a fraction of a driveway that needs base excavation and drainage correction. Here are the ranges we quote for common Unilock-related projects:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
Every estimate includes a written line-item scope showing base work, drainage corrections, unit counts, and labor. You know the full price before any work begins, and it won’t change unless you change the scope. Call (254) 272-5240 to schedule your free estimate.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Spring
Your pavers settled because the sub-base wasn’t built for Spring’s expansive clay. Summer drought shrinks the clay and creates voids, then winter rains swell the soil and push against the edges. If the original installer laid pavers over sand or minimal base, the surface shifts within one wet-dry cycle. We fix it by removing the affected section, compacting the clay, installing geotextile, and rebuilding the base with crushed limestone before resetting the pavers. Call (254) 272-5240 for an exact quote, estimates are free.
Yes, if the color blend is still available from Unilock, we order genuine Tudor units in the same blend. If the run has been discontinued, we source comparably graded aftermarket units and blend them after an on-site color match, so the repair doesn’t stand out as a patch.
Only when the base has failed and resetting isn’t cost-effective. If the original base was sand over clay and the driveway has settled in multiple sections, full replacement with a proper crushed limestone base is often the better long-term value than chasing settlement one section at a time. We show you both options with written pricing and let you decide.
Look for cracks at the fiberglass backer interface, panels leaning out at the top, or gaps opening between courses. These almost always trace back to coarsely graded clay backfill that expands and contracts with our wet-dry cycles. If you catch it before the wall leans, we can pull the backfill, grade it properly, and reinstall the affected panels. If you wait until the wall moves, full rebuild is usually next.
In low-lying Spring neighborhoods with a high water table, a surface-only repair traps water under the pavers and pushes it toward your foundation. We always map the drainage and, where needed, add a subsurface drain or adjust the grade before resetting the surface. Call (254) 272-5240 for a free estimate on any Unilock repair in Spring.
Service Areas Near Spring
We provide Unilock construction service throughout Spring service area, including Cypresswood, Northampton, and the communities along FM 2920. We also serve nearby cities like Humble, and our Unilock service in Pearland and Unilock service in Houston pages cover those areas specifically.
Book Your Unilock Service in Spring Today
If your Unilock pavers, driveway, or U-Cara wall needs attention in Spring, call (254) 272-5240. We’ll schedule a free estimate, walk the site with you, and give you a written price before any work begins. A live person answers our phone 24/7.
Written by Graham Stein, Owner at Elmstead Remodeling Houston, serving Spring, TX.
