Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Houston Owner’s Guide
ActiveYards driveway and paver components are aluminum and vinyl systems we match, order, and install throughout the greater Houston area. A typical driveway paver replacement runs $3,500 – $11,000 depending on square footage, the condition of the base layer, and whether we are swapping individual sections or rebuilding the full run. Most failures show up slowly: a paver rocks underfoot after heavy rain, a corner piece loosens near the garage apron, or the surface settles unevenly after a summer of clay soil shifting beneath it. Homeowners in Houston call us when the driveway has reached the point where they are tired of straightening pieces by hand, or when a tire starts catching on a raised edge.
One thing to know before anything else: when the ground under a Houston driveway moves, the paver above it moves too. The part you see is rarely the only thing that needs attention.
Which ActiveYards Models This Applies To
ActiveYards builds its paver and driveway lines to work as a system, not as standalone pieces. We order replacement components for the Classic, Deluxe, and Estate paver lines, and we measure every existing piece before we quote. The compatibility gotcha worth knowing: ActiveYards has changed paver thickness at least twice in the last decade, and a piece that looks identical in a photo can sit 3/8″ higher or lower in real life. That matters on a driveway more than a walkway, because a mismatched edge is the first thing a front tire finds.
Here is what we ask every homeowner to check before calling, because it saves everyone a trip:
- Look for the model sticker. On most systems it is on the underside edge of a corner piece or under the first full paver near the street. Take a photo with your phone.
- Measure the thickness with a tape measure. Hold it to the clean edge of a removed piece. We need that number to match the build series correctly.
- Count the connection pattern. ActiveYards uses an interlocking tab system. Whether your pieces clip on two sides or four changes which replacement parts will seat properly.
We order OEM ActiveYards parts by default because the factory pieces carry the original color and finish match. When a quality aftermarket equivalent is available, we will tell you and quote both, with an honest note on which one we would put on our own driveway. Elmstead Remodeling Houston is an independent service provider and not affiliated with ActiveYards; we simply know their parts because we install and replace enough of them to have learned what fails, what holds up, and what the manufacturer’s own documentation sometimes misses.
Styles & brands we work with
Signs Your ActiveYards Driveway & Pavers Is Failing
- Rocking or wobbling underfoot. This usually means the sand or gravel base beneath the paver has washed out or compacted unevenly. Houston’s clay soil expands and contracts with every wet-dry cycle, which slowly works the base into low pockets.
- Visible gaps growing between pieces. Interlocking tabs can bend or snap when the ground shifts. Once gaps open, water gets under the surface and the problem accelerates.
- A raised edge catching car tires. A paver lifted even half an inch means the setting bed has failed underneath. Driving over a raised edge every day will crack the piece and eventually the neighbors’, too.
- Discolored or faded surface patches. Aluminum and vinyl coatings break down under years of direct sun. Houston’s UV levels are hard on any outdoor finish, and faded sections often signal material nearing the end of its useful life.
- Water pooling in low spots after rain. A driveway that held water once and drains fine another week has a sub-base problem, not a paver problem. The fix is usually resetting the section, not just replacing the top piece.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed driveway paver replacement in Houston runs $3,500 – $11,000 for a typical single-family driveway. The range moves with three things: how many square feet need work, whether we are resetting the base or just swapping surface pieces, and which ActiveYards series your original build used. A partial repair on a small section of a walkway-adjacent driveway may sit near the bottom of that range. A full removal, base regrade, and reset of a two-car driveway with a border runs higher.
Every quote we give includes the parts, the labor, the base material if needed, haul-away of the old pieces, and a written scope before any work starts. We do not quote a number and then come back with a change order after the first pallet arrives. The workmanship is covered under our 365-Day Done Right Promise: if it is not done right after the job is complete, we make it right. That stamped promise applies to every project we take on in Houston.
You can also reference the brands we work with day to day. Alongside ActiveYards parts, we regularly handle materials from KraftMaid, Cambria, and Silestone, so our crews are comfortable working across named-brand systems rather than improvising around them.
DIY or Call Us?
The safe part of this answer: yes, you can inspect your driveway. Take photos of the failing section, measure a removed paver’s thickness, and note whether the base under the piece is sand, gravel, or bare clay. That information helps us give you a faster, more accurate quote over the phone.
The less safe part: lifting and resetting driveway pavers is not like fixing a walkway stone. Driveway pavers sit under vehicle load, which means an improperly compacted base will fail again within a season. Cutting edge pieces to fit a border requires the right blade and the right eye. A bad cut leaves a sharp edge at tire height, which is a $300 tire and a frustrating afternoon. If the job is more than a single loose piece you can lift and reseat by hand, call (254) 272-5240. We will give you a written price before anything starts, and we will leave the driveway flatter than we found it.
FAQs
In Houston’s climate, you can expect 12 – 20 years from ActiveYards driveway pavers before the base or the finish gives out, depending on drainage, sun exposure, and soil movement under the driveway. The pavers themselves are built well; what shortens their life here is what happens beneath them. Call (254) 272-5240 if your driveway is showing age early and you want an honest read on whether it needs resetting or full replacement. Estimates are free.
Yes, in many cases we can reset and replace individual pavers rather than redoing the whole driveway, as long as the pieces you have are still manufactured and the base is sound. If the base has failed, a spot repair will not hold. Call (254) 272-5240 and we will tell you which situation you are in. The estimate is free either way.
A partial repair on a single section usually takes one day; a full driveway reset typically takes two to three days including base work and clean-up. We schedule around Houston weather, and we keep the job site contained: shoe covers at the door, drop cloths on any floors we cross, and a photo of the clean-up before we leave. Call (254) 272-5240 to get your project on the schedule.
We stock the most common ActiveYards interlocking tabs, corner pieces, and edge caps on our trucks, and we order larger paver runs and custom colors directly with a measured match to your existing pieces. If you send a photo of the label and the thickness measurement, we can usually tell you same-day whether we have the part in hand. Call (254) 272-5240 with those measurements ready.
If your driveway is settling, rocking, or catching tires in Houston, call (254) 272-5240 for a free estimate. We will measure the pieces, match the ActiveYards series, give you a written price before any work begins, and leave the driveway flat, clean, and done right. That is how we work on every driveway, every job, every time.
Written by Graham Stein, Owner, Elmstead Remodeling Houston at Elmstead Remodeling Houston, serving Houston and nearby areas.
