







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The Houston Owner’s Guide
We install Belgard driveway and paver systems throughout Houston, and we keep common Belgard-compatible replacement units, edge restraints, and jointing materials on hand for repair work. A full paver driveway installation in Houston typically runs $7,000 to $18,000 depending on square footage, paver style, and base preparation. Most homeowners discover a problem the same way: a paver starts rocking underfoot, a section sinks after heavy rain, or the edge of the driveway begins to spread into the lawn. Graham Stein and our crews see these failures most often in neighborhoods like Meyerland, West University, and the Heights, where Houston’s clay soil and flash-flood cycles put real stress on paver systems.
Which Belgard Models This Applies To
Belgard manufactures its pavers in three main product families: the Dublin and Catalina lines for residential driveways, the Mega series for heavier traffic and commercial-style applications, and the Holland and Urbana lines for patios and walkways. The part that fails on a paver driveway is rarely the paver itself, it’s what sits beneath it. Edge restraints crack, base material washes out along the sides, or polymeric joint sand breaks down after a few Houston summers. If you have a Belgard paver driveway, check the edge restraint first, it’s the thin plastic or aluminum strip at the driveway perimeter and it is the first thing to fail when water finds a way under the pavers. For replacement parts, we match Belgard’s dimensional specs: standard residential pavers run 60mm and 80mm thickness, and Mega units go up to 100mm for load-bearing driveways. Aftermarket edge restraints in aluminum or heavy-duty PVC typically perform as well as Belgard OEM in Houston’s conditions, and they often cost 20 to 30 percent less.
Styles & brands we work with







Signs Your Belgard Driveway & Pavers Is Failing
- Rocking or wobbling pavers. Paver movement almost always means the bedding sand layer has eroded or been washed out. In Houston, this happens most after extended drought followed by heavy rain, which opens and closes the subgrade.
- Edge spread along the driveway border. When pavers begin drifting into the grass or toward the street, the edge restraint has cracked or pulled away from the soil. Belgard systems rely on those restraints to hold the entire field together.
- Sinking or low spots that hold water. These point to a failed base layer or a soft spot in the native clay underneath. Houston’s expansive clay expands and contracts with moisture, and a base that was never properly compacted will always telegraph that movement upward.
- Wide, crumbling joints between pavers. Polymeric sand should hold firm for several years. When it powders out or washes away, water gets under the pavers, and every wet season in Houston accelerates the damage.
- Faded, chipped, or cracked paver faces. Surface damage on individual units is usually a sign the paver was stressed beyond its rating, or that a previous repair swapped in a non-Belgard unit with mismatched dimensions.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full paver driveway installation in Houston runs $7,000 to $18,000, with most mid-sized driveways in the 400 to 800 square foot range landing between $9,500 and $14,000. Partial repairs, such as replacing a section of failed edge restraint or re-sanding and re-setting a sunken area, typically run $400 to $2,500 depending on how much base repair is required. The biggest cost drivers are driveway size, paver thickness, whether the existing base can be salvaged, and access to the site. Every Elmstead Remodeling job starts with a written price before any work begins, and that price covers the pavers, edge restraints, base material, joint sand, labor, and a photo of the clean-up before our crew leaves. Our 365-Day Done Right Promise applies to every paver repair and installation we complete.
DIY or Call Us?
You can check a few things yourself without touching a tool: walk the driveway edge and look for cracked plastic or aluminum, note any spots that pool water after rain, and press gently on rocking pavers to feel how much movement is there. What you should not do is pull up a section of pavers and start re-setting them. Paver work looks simple, but the base and grading underneath determine whether the repair lasts one Houston rainy season or ten. A homeowner who re-lays pavers on an uncompacted or washed-out base will watch the same failure come back within a year. If the edge is spreading or the surface is uneven, call us at (254) 272-5240 and we’ll send a crew out to diagnose it before you spend a dollar on materials.
FAQs

Belgard pavers themselves carry a transferable lifetime warranty against cracking and manufacturing defects, but the system around them should be expected to need re-sanding and edge repairs every 5 to 8 years in Houston’s climate. The pavers will last decades if the base and edge restraints hold.
Yes, in most cases. A sinking section, spread edge, or failed joint can almost always be repaired without touching the rest of the driveway. Call (254) 272-5240 for a free estimate and we’ll tell you exactly what needs to be replaced and what can stay.
A partial repair, like re-setting a sunken section or replacing an edge restraint, usually takes one day. A full driveway installation takes three to five working days depending on size, weather, and access.
We keep common Belgard Dublin, Catalina, and Mega units on hand along with edge restraints and polymeric sand, and we can source any Belgard product through local Houston distributors within a few days. For a paver repair, we’ll match your existing unit or confirm a compatible replacement before we quote the job.
Written by Graham Stein, Owner, Elmstead Remodeling Houston at Elmstead Remodeling Houston, serving Houston and nearby areas.


