Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Houston Owner’s Guide
We stock and install Cambridge Pavers-compatible driveway and paver replacements across Houston, with typical installed pricing between $7,000 and $18,000 depending on square footage, base condition, and the specific Cambridge line you’re matching. Most homeowners discover a paver problem the same way: a section near the garage apron starts sinking, a row along the curb edge separates, or a single paver cracks and the crack spreads to its neighbors within a season. Houston’s clay soil and summer heat work against pavers in predictable ways, and knowing which Cambridge profile you have on the ground changes the fix.
Key Takeaways
- We match Cambridge Pavers profiles by measurement and mold pattern, not by guesswork, because two Cambridge lines can look nearly identical at a glance but not seat together correctly.
- Installed paver driveway replacement in Houston runs $7,000 – $18,000; a partial repair of a failed section usually lands between $1,500 and $4,500 depending on base work needed.
- Most Cambridge paver failures in Houston trace to the base layer and drainage, not the paver itself. We won’t replace the surface without checking what’s underneath.
- Elmstead Remodeling Houston is an independent contractor. We are not a Cambridge Pavers dealer or affiliate, and we say so plainly so there’s no confusion about warranty language.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers manufactures several paver profiles under the ArmorTec, Ledgestone, RoundTable, and Maytrx names, each with distinct mold dimensions and edge treatments. The compatibility gotcha we see regularly in Houston: a homeowner buys a few replacement pavers by color name alone, only to find the new pieces sit a quarter-inch proud of the surrounding surface because the profile changed between production runs. Cambridge stamps or codes the bottom of many paver lines with a mold identifier, and we photograph that marking before ordering anything. When the code is worn or absent, we take caliper measurements of length, width, and the edge bevel to identify the correct match.
For full driveway installations, the OEM-vs-aftermarket decision matters more. Cambridge ArmorTec pavers carry a specific surface texture and color-fastness rating that budget aftermarket equivalents do not replicate consistently, especially under Houston’s UV exposure. We stock Cambridge-compatible replacement pavers for the most common Houston profiles, and when the exact discontinued line can’t be sourced, we’ll tell you before proposing a mixed-lot repair, because a patchwork driveway looks worse than the original problem.
Styles & brands we work with
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- Settling near the garage apron or curb. The base layer under that section has eroded or compacted unevenly, and the pavers follow the base. In Houston, this often follows a long wet season where water ran through an unsealed edge.
- Widening joints with sand loss. Joint sand washes out through repeated heavy rain, and once the pavers lose that lateral lock, they start shifting under vehicle weight. This is a repairable condition if caught before the base erodes.
- A single cracked paver spreading to neighbors. One cracked paver stops holding the joint tension, and the adjacent pavers take uneven load. In Texas heat, the thermal expansion cycle makes this spread within a year.
- Color fading that’s uneven across the driveway. This usually means a prior repair used a different Cambridge color lot or a non-OEM equivalent. UV in Houston is unrelenting, and mismatched lots show up faster here than in most markets.
- Water pooling in low spots. The surface has lost its drainage pitch, which points to base settlement or an original grading problem. This is the one symptom we recommend addressing before it damages the pavers further.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Cambridge Paver driveway installation in Houston runs $7,000 – $18,000 depending on the paver profile selected, driveway size, base excavation depth, and whether we’re correcting drainage. Partial repair of a failed section typically lands between $1,500 and $4,500, which includes removing the affected pavers, repairing the base and edge restraint, and reinstalling with new joint sand. Every quote is a written price before any work begins, and it lists the paver type, square footage, base material, and labor separately so the number never surprises you later.
Every paver driveway we install or repair in Houston carries the 365-Day Done Right Promise: if the work isn’t done right, we return and make it right. The paver manufacturer’s warranty remains with the product, and our workmanship commitment sits on top of it.
DIY or Call Us?
There’s a safe middle ground here. You can clean the pavers, sweep in new joint sand, and watch how water moves across the surface after a rain. What you shouldn’t do is lift pavers around a damaged section and rebuild the base yourself, because once the edge restraint is disturbed and the base layer exposed, the repair becomes a structural job, not a surface job. We’ve walked onto Houston driveways where a well-meaning repair turned a $600 sand-and-relevel job into a $3,000 base rebuild.
If you’re seeing settling, spreading joints, or water pooling, call us at (254) 272-5240. We’ll assess the paver profile, check the base, and give you a written price before touching a single stone. Estimates are free.
FAQs
Cambridge Pavers installed over a properly compacted base in Houston typically last 25 to 40 years as a surface, with joint sand refreshment every 3 to 5 years depending on rainfall and drainage. The Houston factor that shortens this is base washout under the edges, which is why we always check drainage before any paver repair. Call us at (254) 272-5240 to have your driveway assessed, and we’ll tell you honestly whether you need a repair or a full base rebuild.
Yes, if the base under the pavers is still sound, individual pavers and small sections can be lifted, re-leveled, and reinstalled for a fraction of full replacement cost. If the base has washed out or the pitch is gone, a repair without base work will fail again, often within two Houston rain seasons. Call (254) 272-5240 for a free estimate and we’ll tell you which situation you have before recommending any work.
Most paver repairs in Houston take one to three days, including removal, base correction, reinstallation, and joint sanding, with the time depending on section size and whether new edge restraint is required. We schedule around your family’s routine, using quiet tools where possible during nap and study hours, and we leave the work area swept. Call (254) 272-5240 and we’ll give you a written timeline before we start.
We keep common Cambridge Pavers profiles and matching joint sand stocked for Houston’s most-installed lines, including ArmorTec and Ledgestone, and can source discontinued profiles through our supplier network within a week. When a profile is truly out of production, we’ll tell you before quoting a mixed-lot repair, because we won’t install a patchwork fix without your sign-off. Call (254) 272-5240 and we’ll identify your paver from a photo or an on-site visit.
We also keep parts and material relationships for KraftMaid cabinet lines, Cambria and Silestone countertop surfaces, and the full Elmstead Remodeling Houston range. Graham Stein has been running remodeling work in the Houston area for years, from Meyerland kitchens to driveway work near the Energy Corridor, and the same rule applies to every job: a written price and a covered floor before any work begins, that is where the trust starts.
Written by Graham Stein, Owner, Elmstead Remodeling Houston at Elmstead Remodeling Houston, serving Houston and nearby areas.
