Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Driveway & Pavers: The Houston Owner’s Guide
We stock and install CWS-compatible driveway and paver components, and a typical CWS paver driveway replacement in Houston runs $7,000 to $18,000 depending on square footage, base condition, and paver style. Most Houston owners discover a failing paver section the same way: a low spot collects water after a storm, a paver cracks or shifts near the driveway edge, or the sand between joints washes out after heavy rain. We keep common paver sizes and edge restraints on hand so we can match an existing CWS layout without waiting on a special order. Call (254) 272-5240 for a free estimate on the paver or driveway component you need replaced.
Which CWS Models This Applies To
CWS paver driveways in Houston are typically built in one of three configurations: standard 60mm concrete pavers for residential drives, 80mm pavers for heavier vehicle traffic, and permeable pavers for drainage-sensitive lots. The paver thickness matters more than the brand stamp, because a 60mm paver under a full-size truck will crack far sooner than an 80mm paver under the same load. Before any work starts, we ask you to check the exposed edge of a pulled paver, or look for the dimensional stamp on the paver’s underside. If the original install mixed 60mm and 80mm units, that is a compatibility problem we flag immediately, because the height difference telegraphs through the finished surface. We are an independent Houston contractor, not affiliated with CWS, so our recommendation is always based on what holds up in Houston soil and heat, not on protecting a brand relationship. For most CWS driveways, a quality aftermarket paver from a Houston supplier matches the original color and dimensions at 15 to 25 percent below the OEM price.
Styles & brands we work with
Signs Your CWS Driveway & Pavers Are Failing
- Water pooling in a low spot after rain. The base layer under the pavers has settled or eroded, usually because Houston’s clay soil shifted during a drought-to-rain cycle. Water that sits on the surface pushes more sand out of the joints with every storm.
- Cracked or chipped pavers near the driveway edge or tire tracks. The pavers are taking more load than they were rated for, or the edge restraint has failed and the outer rows are flexing outward.
- Sand washing out of the joints after heavy rain. Once the joint sand thins out, pavers start rubbing against each other, and the surface loses its interlock. This is the most common early failure we see in Houston after a wet spring.
- A wobbling or rocking paver underfoot. The sand bedding layer under that one paver has compacted unevenly. Left alone, the wobble spreads to the surrounding pavers and turns a single-paver fix into a full-section reset.
- Visible sinking or a dip that tracks a straight line across the driveway. This usually points to a buried utility trench or a drainage line that was backfilled loosely. The dip tells you exactly where the original soil compaction failed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full CWS paver driveway replacement in Houston, the installed price range is $7,000 to $18,000. A partial repair, like resetting a 200-square-foot section, falls between $1,200 and $3,500. The range is driven by square footage, the paver thickness, the condition of the base layer, and whether we need to regrade for drainage. Every project gets a written price before any work starts, and that price includes the pavers, bedding sand, joint sand, edge restraint, haul-away of the old materials, and clean-up with a photo of the finished site before the crew leaves. If the base layer needs to be excavated and rebuilt with crushed limestone, that is line-itemed on the written quote, not added as a surprise later. We stand behind the workmanship on every paver and driveway repair, and the 365-Day Done Right Promise covers the finished result: if it is not done right, we make it right.
DIY or Call Us?
A homeowner can safely check a few things before calling: look for the paver thickness stamp, check whether the sand between joints is still packed, and mark the outer edges of any sinking area with chalk so we can see the full spread. What we do not recommend is pulling and resetting pavers yourself. The base layer under a Houston driveway is load-bearing, and a paver reset on uncompacted soil leaves you with the same failure in six months, plus a pile of pavers in the yard. If you are dealing with pavers adjacent to a driveway drainage channel or a buried downspout line, we ask you not to dig near those areas. Call (254) 272-5240 and we’ll come out, look at what has failed, and give you a written price for the repair, whether that is one section or the whole drive.
FAQs
A properly installed paver driveway in Houston lasts 20 to 30 years when the base is compacted correctly and the joint sand is topped up every three to five years. Houston’s heat and clay soil shorten that lifespan for any paver if the base layer was not built for our soil movement, which is why we inspect the base before quoting any repair. Call (254) 272-5240 and we will tell you what is actually failing.
A single cracked paver can usually be pulled and replaced with a matching unit for a fraction of the cost of a full section, provided the base under it is still sound. If the crack came from base settlement, the fix is not just the paver; the base under that spot needs to be recompacted or the new paver will fail the same way. Call (254) 272-5240 for a free estimate on the repair.
A small section reset, usually a 100 to 300 square foot area, takes one to two days including base compaction and joint sand. A full driveway replacement takes three to seven days depending on the base work, the paver pattern, and Houston’s weather window. We give you a written timeline with the written price, so there is no guesswork about when the driveway is back in service.
We keep common 60mm and 80mm concrete pavers and edge restraints on the truck for matching existing CWS layouts, and we can source color and size matches from Houston suppliers within a few days for less common profiles. If you know the paver thickness and can snap a photo of the surface and a pulled unit, we can usually confirm the match before we arrive. Call (254) 272-5240 and we will check stock for your specific paver.
Written by Graham Stein, Owner, Elmstead Remodeling Houston at Elmstead Remodeling Houston, serving Houston and nearby areas.
