Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Driveway & Pavers: The Houston Owner’s Guide
If you’re researching KraftMaid driveway and paver components in Houston, the honest answer is that KraftMaid doesn’t manufacture driveway pavers, concrete, or asphalt products. KraftMaid builds cabinetry. What you’re likely dealing with is a paver driveway, walkway, or patio installed alongside a KraftMaid kitchen or bath project, and the failure you’re seeing is in the paver base, edging, or joint material. We install and repair paver driveways in Houston for $7,000 to $18,000 on full installations, with repair work starting around $500 depending on the scope. We stock paver repair materials on our trucks and can usually diagnose the issue in one visit.
Here’s how Houston homeowners typically find us: a paver sinks near the garage apron after a heavy rain, the sand between pavers washes out into the lawn, or an edge row starts drifting outward because the plastic edging failed. Sometimes it’s a tree root lifting a section near the driveway. The pavers themselves rarely fail. What fails is what’s underneath them or what holds them in place, and that’s where the repair conversation starts.
Which KraftMaid Models This Applies To
Since KraftMaid doesn’t produce pavers, there’s no model number to match. What matters is the paver manufacturer, the paver size, and the base depth. Most Houston paver driveways use concrete pavers from Belgard, Tremron (which operates a plant in Texas), or Pavestone, and the pavers sit on a compacted base of crushed limestone or decomposed granite. If you have a KraftMaid kitchen and a paver driveway, the driveway is a separate system from a separate supplier.
The compatibility question that actually matters is paver thickness. Driveway pavers need to be 60mm to 80mm thick to handle vehicle weight. Patio pavers run 40mm to 50mm. If a contractor installed patio-grade pavers on a driveway, they’ll crack under a pickup or SUV within a few years. We check this first on every repair call in Houston, because paver thickness is the most common spec mistake we see on driveways in neighborhoods like Meyerland and Kingwood. When it comes to replacements, we match the existing paver’s size, color batch, and thickness. OEM pavers from the original manufacturer are always the right first choice, but for discontinued color lines, quality aftermarket equivalents from Tremron or Belgard can match within an acceptable color range. We’ll show you samples side by side before ordering.
One more note: Elmstead Remodeling Houston is an independent contractor, not affiliated with KraftMaid. We work with KraftMaid cabinets, and we also stock and install Cambria, Silestone, and Kohler products. But when it comes to your driveway, the paver brand and the base are what we’re matching.
Styles & brands we work with
Signs Your KraftMaid Driveway & Pavers Is Failing
- A paver sinks or dips near the curb or garage apron. This usually means the aggregate base wasn’t compacted properly or has washed out through a failed edge. Water pools there after rain, and over time the dip gets worse.
- Sand washes out of the joints every time it rains. The polymeric sand between pavers locks the surface together, but Houston’s heavy downpours wear it down. When you see sand pooling at the driveway edge after a storm, the joint material is failing and will need to be redone.
- The edge row of pavers is drifting or separating from the border. Plastic edging fails in Texas heat and shifting clay soil. Once the edge lets go, the pavers start moving outward, and the whole perimeter loosens up.
- Weeds are growing through the joints within weeks of cleaning. That tells you the remaining joint sand is too thin to block root growth. It’s a sign the driveway hasn’t had a sand refresh in several years.
- A tree root has lifted a paver section into a slight ridge. Common in older Houston neighborhoods with live oaks. The root doesn’t damage the paver. It warps the plane of the surface, and you’ll feel it when you drive over it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full paver driveway installation in Houston, plan on $7,000 to $18,000 depending on square footage, paver type, base depth, and whether we’re removing an old concrete slab. For driveway replacements where we pull up an existing surface and install new pavers, the range runs $5,000 to $14,000. Repair work is more surgical: re-leveling a sunken section, resetting loose edge pavers, or refreshing polymeric sand typically runs $500 to $2,000 depending on how much of the driveway is involved. Every project gets a written price before any work starts, so the number we quote is the number you pay. No surprises after the crew arrives.
That price includes the pavers, the crushed stone base, geotextile fabric where the soil needs it, polymeric sand, edging, labor, haul-away of old material, and the 365-Day Done Right Promise. If the repair fails within a year of completion, we make it right. We also send a photo of the cleanup before the crew leaves, with drop cloths and shoe covers used on any path through the house.
DIY or Call Us?
Some paver maintenance is safe to handle yourself: sweeping new sand into worn joints, pulling weeds by hand, or hosing off surface dirt. You can also check your paver thickness by measuring the side of an exposed paver with a tape measure, and if it’s under 60mm on a driveway, you’ve found your problem without spending anything on a service call.
What goes wrong when driveway paver repair is attempted without the right equipment and base knowledge? A homeowner re-levels a few sunken pavers by adding sand underneath, and six months later the same spot has a puddle again because the underlying aggregate base wasn’t re-compacted. Or they use the wrong joint sand from a big-box store and it washes out in the first storm, leaving loose pavers that rock under the car tires. Paver repair isn’t dangerous like gas or electrical work, but it is easy to do in a way that looks fine for a month and fails after a season. If you’d rather have it done once, call us at (254) 272-5240 and we’ll take a look.
FAQs
A properly installed paver driveway in Houston lasts 25 to 40 years, with joint sand refreshed every 3 to 5 years. The Texas heat and clay soil movement wear down the base faster than the pavers themselves, so the real lifespan depends on the base depth and drainage. Call (254) 272-5240 if you’re not sure whether yours was built to driveway spec.
Yes, in most cases the repair is localized. Sunken sections can be lifted, the base re-compacted, and the same pavers re-laid, and loose edges can be reset with new edging and joint sand. Full replacement is only necessary when the base has failed across most of the driveway or the pavers are cracked from vehicle weight. We’ll tell you honestly which one you need after a site visit.
Most repair jobs take 1 to 2 days, depending on how much of the driveway needs base work. A full paver installation or replacement typically runs 3 to 5 days including excavation, base, laying, and joint sand. We schedule around your family’s routine, and we use quiet tools during nap and school hours when we can.
We stock polymeric sand, edge restraints, crushed stone, and the most common paver sizes in Houston from Belgard and Tremron. If your pavers need a custom color batch or an uncommon size, we’ll order the material and confirm lead time before we schedule the work. Estimates are free, and the written price comes before any work begins.
Written by Graham Stein, Owner, Elmstead Remodeling Houston at Elmstead Remodeling Houston, serving Houston and nearby areas.
If your paver driveway is sinking, spreading at the edges, or washing out its joints, call us at (254) 272-5240 to schedule a free estimate. Graham and the team will measure, diagnose, and give you a written price before any work starts. A written price and a covered floor before any work begins, that is where the trust starts.
